Canada is a primarily urbanized country in North America. Its people have many diverse interests, including photography. They love to do things like photo printing on their own as a hobby. Statistics show that there are more than 70,000 photographers employed in Canada. The country also has a vibrant printing industry, including metal photo printing.
Do you have an inkjet printer, and want to do metal photo printing at home? A metal photo print is a stunning art piece that can bring your favorite images to life. Making your prints can give you a sense of satisfaction. However, if you want a professional finish, many companies offer metal print photo service in Canada like Canvas n Decor.
Metal printing has many benefits in terms of image quality and longevity. It can also provide a modern look to your images due to its frameless design. However, to give your prints a crisp and professional appearance, choose photographs with the highest resolution to print. This article offers a step-by-step guide of making metal photo prints using your inkjet printer.
How to Make DIY Metal Photo Prints
Images printed on metal materials like aluminum can make them more dimensional and durable. If you want the best prints, allow printing services providers like Canvas n Decor to make them. Here is a step-by-step process of printing your images or photographs on metal using an inkjet printer:
- Purchase a roll of aluminum flashing online or at a local hardware store near you. When choosing an aluminum flashing, go for the thinnest ones. For best results, buy a flashing with a thickness of fewer than 0.025 centimeters (0.01 inch).
- Cut the flashing to your preferred sizes using tin snips. However, the cut pieces should be less than the feed on your printer to fit. Use a measuring tape and a ruler to measure and cut your desired sizes.
- Use 600-grit sandpaper to sand the surface of the cut flashings to remove their protective topcoat. You should only sand the side to be printed. To avoid scratches, you may use a random orbital sander or a sanding block.
- Utilize a commercial cleaner to wash the flashing surfaces to eliminate all grease residues on the cut flashings. You may use a sponge with dish detergent and water in cleaning the surfaces.
- Apply an inkjet precoat to the surface of the flashing to make sure the ink will stick to the flashing during printing. When applying the precoat, use double-sided tape to secure the flashing to a flat surface. Then, apply a liberal amount of precoat across the top edge of the flashing. Using a coating bar or straightedge, scrape down the coating slowly to achieve an even layer.
- Find a piece of paper that fits your printer and attach the flashing using masking tape. The paper will serve as a guide to the flashing during the printing process. Ensure that the side of the flashing to be printed onto is facing up.
- Prepare the photographs or images to be printed on your computer. To achieve the best results, make sure to use images with high resolution. Before the actual printing, run a test print using a piece of paper to ensure the proper positions of the precoated surface and the image to be printed.
- After your test print, you are now ready for the actual printing. Load the flashing into the feed like your normal printing process. But before you click ‘print,’ check if your printer has sufficient ink.
- Press the ‘print’ button. After the printing, remove the flashing and allow the ink to dry.
- Frame your prints.
By making your metal photo prints yourself, you can have bragging rights to your wall décor. However, to ensure the quality of your images, it is always an excellent option to seek the services of professionals.